Know the Three Ways to Clean and Sterilise Tattoo Machines

A tattoo machine is believed to be an ideal habitat for pathogens, bacteria, and a wide range of other harmful viruses. Once the machine has been used for etching a design, it gets clogged with ink, blood, and plasma.

If an artist reuses the machine without cleaning or disinfecting it thoroughly, he/she increases the chances of infection to a great extent. Well, the following write-up specifies the best equipment to use. Please check them out now.

1. Autoclave

The experts providing quality yet affordable tattoo machines Australia said autoclave is perhaps the best when it comes to sterilisation. It creates immensely high pressure and heat to kill germs on every nook and corner of the machine.

• Extract out all the parts of the tattoo machine that must be sterilised right away. Keep them inside a bag.

• All the autoclaves have trays and a tank. Place the bag on the tray gently. Now fill the tank with water and turn on the system.

• Allow the autoclave to sit for at least two hours. In this period, the autoclave will clean whatever is inside the bag.

• Once the entire procedure is complete, the temperature has come down, open the autoclave and take the bag out.

• Make sure the tattoo machine has dried completely. It would be best to air dry. Now assemble all the parts following the steps written in a user manual.

2. Chemical-Based Germicide

Chemical-based germicides can also thoroughly clean tattoo machines. When purchasing, please make sure that the germicide contains ingredients that can destroy all kinds of germs. Go through the label with maximum caution.

All chemical germicides work differently, and the time they take to sterilise also varies. It would be right to read out the application process before undertaking the next step.

Put all the parts in glassware. Now pour germicide solution and leave it for three hours. Take out the components and wipe the excess of the chemical with a clean cloth. After air drying, assemble the parts.

3. Ultrasonic Cleaner

Autoclaves are incredibly expensive, and the artists on a limited budget cannot, unfortunately, get one. An ultrasonic cleaner is a cost-effective alternative that ensures to deliver an optimal outcome.

•The sellers of tattoo machines in Australia said that every ultrasonic cleaner has a tank. 250 to 500ml is the usual capacity. Fill the entire tank with warm water.

• Place the disassembled parts of the machine inside the tank and turn the cleaner on. Set the time depending on the current condition of the parts.

• Once the time is up, rinse the parts under running water. Before reassembling, make sure the parts have fully dried.
Although both ultrasonic cleaners and autoclaves can kill germs, they are ineffective on HIV.

Cleaning, sterilisation, and overall maintenance are highly necessary. All of the steps mentioned above assure that a tattoo machine lasts long for a prolonged period. Finding the signs of wear and tear at the earliest is necessary. The artists must also learn how to fix common issues such as cord slip-ups and carbon accumulation, both of which can reduce the efficiency of the machine.