Unfortunately, those who smile at those nice clean teeth in the mirror are as fortunate as those who can achieve illuminated success. Either they haven’t been able to find a product that works, or they don’t know how to use it properly.
In this article, I will be sharing with you simple tricks on how you can use Crest 3D White right and get the best results possible. The result of using Crest 3D White effectively could be considered a miracle. When you feel that it is working, you will feel happy and confident. You’ll start to see a difference in a matter of a few weeks or months, but if you keep using Crest 3D White properly, then you should be able to get the results that make your teeth white before your wedding day!
1. Put it on the right way round
When Crest 3D White is applied to your teeth, it has to come in contact with all surfaces so that maximum whitening can occur. It will leave your teeth whiter and brighter. It is also best to start from the top and then move down towards the bottom of your teeth if you want to achieve a natural, professional look.
2. Denture use a little extra effort
For those who wear dentures, using Crest 3D White will require a little more effort as it’s hard to ensure that the lips are wiped clean enough before the product is applied. You’ll need to use an extra piece of tissue, and clean your lips as well as inside the mouth before you apply Crest 3D White.
3. Use a little bit more whitening gel
When it’s time to go over those teeth again, use a little bit more, Crest 3D White, as well as rubbing the product into those nasty areas that may be left untouched by the first application. The product will gradually wear off, and you will need to reapply it once again.
4. Wait at least three or four hours before you brush your teeth or floss your teeth
It is imperative that the whitening cocktail does not come in contact with water and would be washed away. Before going to sleep, make sure you drink plenty of water (more than 8oz) and apply Crest 3D White again before going to sleep unless your mouth tends to be dry during the night.
5. Wait at least 10 minutes before applying any mouthwash
It is vital because Crest 3D White has a whitening effect that lasts for about ten minutes after the product has been applied to the teeth. It means that you need to give your teeth some time to absorb the whitening cocktail before you start cleaning your teeth with any oral care products, so there is no breath smell coming from them.
6. Keep the toothpaste on for at least two minutes without swallowing or talking
After 2 minutes, spit out the toothpaste and rinse your mouth thoroughly with water. it is the only way to not only whiten your teeth but also to clean them. After rinsing properly, make sure that you brush your teeth with a toothbrush and toothpaste for at least one minute to ensure they are free of any food particles or dead cells which could hinder the teeth whitening process.
If you follow the instructions carefully, you’ll be able to achieve confident results in no time. So, whether you are giving your teeth some extra attention with Crest 3D White or using the product right for the first time, you can be sure that it’s working.
Honey sriwas is the founder of The PC Magazine. A Blogger, Entrepreneur and also recognized as a Digital Marketing Consultant.
